Pennsylvania Code & Bulletin
COMMONWEALTH OF PENNSYLVANIA

• No statutes or acts will be found at this website.

The Pennsylvania Bulletin website includes the following: Rulemakings by State agencies; Proposed Rulemakings by State agencies; State agency notices; the Governor’s Proclamations and Executive Orders; Actions by the General Assembly; and Statewide and local court rules.

PA Bulletin, Doc. No. 18-356

PROPOSED RULEMAKING

ENVIRONMENTAL QUALITY BOARD

[ 25 PA. CODE CH. 245 ]

Administration of the Storage Tank and Spill Prevention Program; Correction

[48 Pa.B. 1421]
[Saturday, March 10, 2018]

 An error occurred in the proposed rulemaking published at 48 Pa.B. 1101, 1130 (February 24, 2018). There was a typographical error in the acronym in the heading of proposed § 245.110(b)(2) (relating to certification of installers). The heading is corrected as follows. The remainder of the document was accurate as published.

Annex A

TITLE 25. ENVIRONMENTAL PROTECTION

PART I. DEPARTMENT OF ENVIRONMENTAL PROTECTION

Subpart D. ENVIRONMENTAL HEALTH AND SAFETY

ARTICLE VI. GENERAL HEALTH AND SAFETY

CHAPTER 245. ADMINISTRATION OF THE STORAGE TANK AND SPILL PREVENTION PROGRAM

Subchapter B. CERTIFICATION PROGRAM FOR INSTALLERS AND INSPECTORS OF STORAGE TANKS AND STORAGE TANK FACILITIES

GENERAL CERTIFICATION REQUIREMENTS

§ 245.110. Certification of installers.

 (a) An installer certification authorizes the person to whom it is issued to conduct tank handling activities or tightness testing activities pertaining to storage tank systems or storage tank facilities in one or more of the categories in subsection (b).

 (b) Installer certifications may be issued for the following categories:

 (1) Underground storage tank [system-installation] system installation and modification {UMX}. Installation and modification of underground [storage tanks and] storage tank systems including[, but not limited to,] the tank and all associated ancillary equipment, appurtenances, corrosion protection systems, structural components and foundations. This category also includes conducting preinstallation air pressure tests for underground storage tank systems, overfill prevention equipment evaluations, containment sump and spill prevention equipment testing, and release detection equipment testing.

(2) Underground storage tank system minor modification {UMI}. Limited to the performance of minor modifications of underground storage tank systems. This category also includes conducting overfill prevention equipment evaluations, containment sump and spill prevention equipment testing, and release detection equipment testing.

[(2)] (3)Underground storage [tank-removal] tank system removal {UMR}. Removal from service of underground storage tank systems [or storage tank facilities].

[(3)] (4)Underground storage tank [system-tightness] system tightness tester {UTT}. Tightness testing activities involved in conducting and interpreting results of volumetric and nonvolumetric tests on underground storage tank systems [or storage tank facilities]. This category also includes containment sump and spill prevention equipment testing and release detection equipment testing.

[(4)] (5)Aboveground manufactured metallic storage [tank-installation] tank system installation and modification {AMMX}. Installation and modification of aboveground manufactured metallic storage tank systems, including[, but not limited to,] the tank and all associated ancillary equipment, appurtenances and corrosion protection systems. This category also covers foundations, containment structures and structural components when they are designed by an engineer qualified in civil construction or when installing small aboveground UL-labeled tanks with manufacturer's installed self-containment or diking systems.

[(5)] (6)Aboveground nonmetallic storage [tank-installation] tank system installation and modification {AMNX}. Installation and modification of above-ground nonmetallic [storage tanks or] storage tank systems, including[, but not limited to,] the tank and all associated ancillary equipment and appurtenances. This category also covers foundations and structural components when they are designed by an engineer qualified in civil construction or as specified by the tank manufacturer.

[(6)] (7)Aboveground manufactured storage [tank-removal] tank system removal {AMR}. Removal from service of aboveground manufactured storage tank systems [or storage tank facilities].

[(7)] (8)Aboveground field constructed metallic storage [tank-installation] tank installation, modification and removal {AFMX}. Installation, modification and removal of aboveground field constructed metallic storage tanks and corrosion protection systems. This category also covers the modification of tank shell components of an aboveground manufactured metallic storage tank [system].

[(8)] (9)Aboveground field constructed storage [tank-removal] tank system removal {AFR}. Removal from service of aboveground field constructed and manufactured aboveground storage tank systems [or storage tank facilities].

[(9)] (10)Aboveground storage tank [mechanical-installation] system mechanical installation, modification and removal {AMEX}. Installation, modification and removal of tank related mechanical appurtenances, including[, but not limited to,] valves, fill piping, suction piping, foam system piping, pumps, corrosion protection systems, release detection systems, and spill and overfill prevention systems that are components of an aboveground storage tank system [or storage tank facility].

[(10)] (11)Aboveground storage [tank-civil] tank system civil {ACVL}. Installation and modification of tank related structural components, including[, but not limited to,] foundations, dike walls, field grading, above and below grade vaults, pump supports, pipe supports, corrosion protection systems and drainage systems associated with an aboveground storage tank system [or storage tank facility].

[(11) Storage tank-liner] (12) Storage tank liner {TL}. Activities involved in installation or modification of internal linings for underground and aboveground storage tank systems [or storage tank facilities] and the evaluation of underground storage tank linings as required in § 245.422(b)(1)(ii) (relating to upgrading of existing underground storage tank systems).

[Pa.B. Doc. No. 18-356. Filed for public inspection March 9, 2018, 9:00 a.m.]



No part of the information on this site may be reproduced for profit or sold for profit.

This material has been drawn directly from the official Pennsylvania Bulletin full text database. Due to the limitations of HTML or differences in display capabilities of different browsers, this version may differ slightly from the official printed version.